Agilent Technologies Switch/Measure Switch User Manual


 
9
Agilent 34980A Multifunction Switch/Measure Unit
User’s Guide
Agilent Technologies
2
Features and Functions
SCPI Language Conventions 10
General Measurement Configuration 12
Analog Bus and Internal DMM Considerations 28
Temperature Measurement Configuration 30
Voltage Measurement Configuration 35
Resistance Measurement Configuration 37
Current Measurement Configuration 38
Frequency Measurement Configuration 39
Mx+B Scaling 40
Scanning 42
Monitor Mode 60
System-Related Operations 62
Calibration Overview 70
Remote Interface Configuration 74
Factory Reset State 84
Instrument Preset State 86
You will find that this chapter makes it easy to look up all the details
about a particular feature of the Agilent 34980A. Whether you are
operating the instrument from the front panel or over the remote
interface, this chapter will be useful. For information specific to the
34980A plug-in modules, see the later chapters in this manual.
NOTE
For complete details on the SCPI (Standard Commands for Programmable
Instruments) commands, see the Programmer’s Reference Help file
included on the Agilent 34980A Product Reference CD-ROM. The CD-ROM
is located inside the rear cover of this manual.