Filter
Top Products
Chapter 4 BIOS Setup Utility
82 Reference Manual XTX 820
♦ 4
th
Boot Device – [Disabled], [Primary Master], [Primary Slave], [Secondary Master],
[Secondary Slave], [Legacy Floppy], [USB Floppy], [USB Harddisk], [USB CDROM],
[USB Removable Device], [Onboard LAN], [External LAN], [PCI Mass Storage],
[PCI SCSI Card], [Any PCI BEV Device], [Third Master], or [Third Slave]
♦ 5
th
Boot Device – [Disabled], [Primary Master], [Primary Slave], [Secondary Master],
[Secondary Slave], [Legacy Floppy], [USB Floppy], [USB Harddisk], [USB CDROM],
[USB Removable Device], [Onboard LAN], [External LAN], [PCI Mass Storage],
[PCI SCSI Card], [Any PCI BEV Device], [Third Master], or [Third Slave]
♦ 6
th
Boot Device – [Disabled], [Primary Master], [Primary Slave], [Secondary Master],
[Secondary Slave], [Legacy Floppy], [USB Floppy], [USB Harddisk], [USB CDROM],
[USB Removable Device], [Onboard LAN], [External LAN], [PCI Mass Storage],
[PCI SCSI Card], [Any PCI BEV Device], [Third Master], or [Third Slave]
♦ 7
th
Boot Device – [Disabled], [Primary Master], [Primary Slave], [Secondary Master],
[Secondary Slave], [Legacy Floppy], [USB Floppy], [USB Harddisk], [USB CDROM],
[USB Removable Device], [Onboard LAN], [External LAN], [PCI Mass Storage],
[PCI SCSI Card], [Any PCI BEV Device], [Third Master], or [Third Slave]
♦ 8
th
Boot Device – [Disabled], [Primary Master], [Primary Slave], [Secondary Master],
[Secondary Slave], [Legacy Floppy], [USB Floppy], [USB Harddisk], [USB CDROM],
[USB Removable Device], [Onboard LAN], [External LAN], [PCI Mass Storage],
[PCI SCSI Card], [Any PCI BEV Device], [Third Master], or [Third Slave]
Boot Settings Configuration
• Quick Boot – [Disabled] or [Enabled]
∗ If [Disabled] is selected, the BIOS is allowed to perform all POST test, but this slows the
boot process.
∗ If [Enabled] is selected, the BIOS is allowed to skip certain POST tests to boot faster.
• Quiet Boot – [Disabled] or [Enabled]
∗ If [Disabled] is selected, the BIOS displays normal POST messages on screen.
∗ If [Enabled] is selected, the BIOS displays the customized splash screen (OEM logo) on
screen The splash screen image (or OEM boot logo) will appear on the display instead of the
POST messages.
For more information about how to customized a splash screen (OEM boot logo), refer to the
System Utility and the System Utility Users Guide located on the XTX 820 Doc & SW CD-ROM
in the System Tools and Documentation directory under Software.
♦ Boot Display – [Clear] or [Maintain]
The Boot Display field only appears on screen when the Quiet Boot is set to [Enabled]. The boot
display field controls the end of the POST boot display and how it is handled.
∗ If Boot Display is set to [Clear], the BIOS will clear the screen and switch to VGA text mode.
∗ If Boot Display is set to [Maintain], the BIOS will maintain the current display contents
and graphics video used for POST display.
• Automatic Boot List Retry – [Disabled] or [Enabled]
• AddOn ROM Display Mode – [Force BIOS] or [Keep Current]
∗ If [Force BIOS] is selected, any third party BIOS or add-on ROM messages will be
displayed on screen during the boot process.
∗ If [Keep Current] is selected, no third party BIOS messages will be displayed on screen
during the boot process.