Filter
Top Products
Chapter 1 About This Manual
XTX 820 Reference Manual 3
Ampro XTX Products
• XTX 800 – This high-performance, compact, rugged Computer-On-Module (COM) solution uses
Intel 1.8 GHz Pentium M 745, 1.4 GHz Pentium M 738, or 1.0 GHz Celeron M 373 with an Intel
852GM chipset. This XTX module comes standard with enhanced peripherals, including PCI
bus, two Serial ATA ports and one Ultra/DMA 33/66/100 EIDE controller for two EIDE drives,
six USB 2.0 ports, one shared EPP/ECP parallel/ floppy port, two serial ports with TTL levels,
one Infrared (IrDA) port, PS/2 keyboard and mouse interfaces, and an AC’97/HDA (High
Definition Audio) CODEC on the module. The XTX 800 also supports ACPI 2.0 Power
Management, 10/100BaseT Ethernet interface, up to 1 GB of DDR RAM in a single 200-pin
SODIMM slot, a 128-bit graphics controller for CRTs and LVDS flat panels, and a SDVO (Serial
Digital Video Output) interface.
Ampro ETX Products
• ETX 700 – This high-performance, compact, rugged Computer-On-Module (COM) solution uses
Intel® 650 MHz Low Voltage Celeron® or 400 MHz Ultra Low Voltage Celeron CPUs with up
to 512 kB Level 2 Cache on board. This ETX module comes with the standard peripherals,
including dual Ultra/DMA 33/66/100 IDE, floppy drive interface, PCI bus, ISA bus, serial,
parallel, PS/2 keyboard and mouse interfaces, 10/100BaseT Ethernet, USB ports, AGP 4X
equivalent video interface with up to 32 MB UMA Frame Buffer that supports built-in LVDS at
1600x1200 resolution, and AC’97 audio. It also supports up to 512 MB of SODIMM DRAM on
a 50% thicker PCB to meet your custom baseboard needs.
• ETX 802 – This high-performance, compact, rugged Computer-On-Module (COM) solution uses
Intel 1.4 GHz LV Pentium® M 738,1.0 GHz Celeron M 373, or 800 MHz ULV Celeron M CPUs
with an Intel 852GME chipset. This ETX module comes with the standard peripherals, including
dual Ultra/DMA 33/66/100 IDE, floppy drive interface, PCI bus, ISA bus, serial, parallel, PS/2
keyboard and mouse interfaces, 10/100BaseT Ethernet, USB 2.0 ports, 128-bit graphics
controller interface with up to 64 MB UMA Frame Buffer that supports CRT and LVDS at
1600x1200 resolution, and AC’97 audio. It also supports up to 1 GB of SODIMM DDR RAM
on a 50% thicker PCB to meet your custom baseboard needs.
Other Ampro Products
• CoreModule™
Family – These complete embedded-PC subsystems on single PC/104 or PC/104-
Plus form-factor (3.6"x3.8") modules feature 486, Celeron, or Celeron M CPUs. Each
CoreModule includes a full complement of PC core logic functions, plus disk controllers, and
serial and parallel ports. Most modules also include CRT and flat panel graphics controllers
and/or an Ethernet interface. The CoreModules also come with built-in extras to meet the critical
reliability requirements of embedded applications. These include onboard solid state disk
compatibility, watchdog timer, and smart power monitor.
• LittleBoard™ Family – These high-performance, highly integrated single-board computers use
the EBX form factor (5.75"x8.00"), and are available with the Intel Pentium M, Celeron M,
Pentium III, or Celeron processors. The EBX-compliant LittleBoard single-board computers
offer functions equivalent to a complete laptop or desktop PC system, plus several expansion
cards. Built-in extras to meet the critical requirements of embedded applications include onboard
solid state disk capability, watchdog timer, and smart power monitor.
• MightyBoard™ Family – These low-cost, high-performance single-board computers (SBC) use
the Mini-ITX form factor (6.75"x 6.75") and are available with Intel Celeron M or Pentium M
processors. MightyBoard products offer the equivalent functions of a complete laptop or desktop
PC system, including DDR memory, high performance graphics, USB 2.0, Gigabit Ethernet, plus
standard PCI expansion capability in one card slot.