Filter
Top Products
Chapter 7 X330WAN CLI Commands
80 Avaya X330W-2DS1 User’s Guide
Example:
To set the RIP Send and Receive mode on the interface “marketing” to be listen-only:
X330WAN-2DS1-1(super-if:Serial:1:1)# ip rip send-receive talk-
listen
ip rip split-horizon (Interface Context)
Use the ip rip split-horizon command to enable split-horizon mechanism.
The no form of this command disables the split-horizon. By default split-horizon is
enabled.
The split-horizon technique prevents information about routes from exiting the
router interface through which the information was received. This prevents routing
loops.
Note: This command is executed from the Serial, Loopback, Fast Ethernet and
Fabric Fast Ethernet interfaces.
The syntax for this command is:
[no] ip rip split-horizon
Example:
X330WAN-2DS1-1(super-if:Serial:1:1)# no ip rip split-horizon
listen-only - Set RIP to only receive updates on
the interface and not transmit them (for Avaya
P332G-ML/P332GT-ML devices only).
default route metric Integer value