Filter
Top Products
Policy CLI Commands
Avaya X330W-2DS1 User’s Guide 107
Example:
X330WAN-2DS1-1(super)# ip access-list-owner 101 admin
ip composite-op access
Use the ip composite-op access command to set the access value of a policy
operation.
Note: This command is only supported by the X330WAN module.
The syntax for this command is:
ip composite-op access <policy-list-number> <composite-
operation-index> <access>
Example:
X330WAN-2DS1-1(configure)# ip composite-op access 101 17
forward
ip composite-op dscp
Use the ip composite-op dscp command to set the DSCP value of a policy
operation.
Note: This command is only supported by the X330WAN module.
The syntax for this command is:
ip composite-op dscp <policy-list-number> <composite-op-index>
<dscp value>
policy-list-number An integer (100..149), where 0 is the default list
composite-operation-index Index of operation in the table.
access forward | deny
policy-list-number An integer (100..149), where 0 is the default
list.
composite-op-index Index of operation in the table.