Filter
Top Products
Chapter 7 X330WAN CLI Commands
120 Avaya X330W-2DS1 User’s Guide
WAN CLI Commands
This section contains a list of all WAN related CLI commands.
async mode interactive (Console interface context)
Use the async mode interactive command to enter Modem mode every time
the proprietary modem cable is plugged into the Console port.
The syntax for this command is:
async mode interactive
async mode terminal (Console interface context)
Use the async mode terminal command to disable interactive mode on the
Console, disabling the use of PPP and entering Terminal mode.
The syntax for this command is:
async mode terminal
async reset-modem (FastEthernet interface context)
Use the async reset-modem command to reset the connected modem.
The syntax for this command is:
async reset-modem
autoneg
Use the autoneg command to set the port speed and duplex to auto negotiation
mode. Use the no form of this command to disable auto negotiation mode.
The syntax for this command is:
[no] autoneg
bandwidth (Interface context)
Use the bandwidth command to set the bandwidth informational parameter. Use
the no form of this command to set the bandwidth informational parameter to the
default.
Note: This command is executed from the Serial, Loopback, Fast Ethernet and
Fabric Fast Ethernet interfaces.