Filter
Top Products
Chapter 7 X330WAN CLI Commands
124 Avaya X330W-2DS1 User’s Guide
Note: If the user has an active ppp session over this channel-group, a warning is
issued.
Note: If a user issues this command with an existing channel-num, it is assumed
that the timeslot-list is a list of timeslots that should replace the current list of
timeslots already defined for that channel-group.
Note: Channel groups, voice groups, and TDM groups all use group numbers. All
group numbers configured for channel groups, voice groups, and TDM groups
must be unique. For example, you cannot use the same group number for a channel
group and a TDM group.
Examples:
X330WAN-2DS1-1(config-controller:1)# channel-group 10
timeslots 10-24
X330WAN-2DS1-1(config-controller:1)# channel-group 2
timeslots 5-6,8,20-24
clear fragment
Use the clear fragment command to clear the fragment database and restore
its defaults.
Note: No fragmentation will be done of packets in transit through the router.
The syntax for this command is:
clear fragment
clock source (Controller Context)
Use the clock source command to configure the clock source for an E1/ T1
controller. Use the no form of this command to return the value to the default.