Filter
Top Products
Chapter 7 X330WAN CLI Commands
100 Avaya X330W-2DS1 User’s Guide
Example:
X330WAN-2DS1-1(configure router:rip)# timers basic 30 180
timers spf (Router-OSPF context)
Use the timers spf command to configure the delay between runs of OSPF’s
SPF calculation. Use the no form of this command to restore the default (3 seconds).
The syntax for this command is:
[no] timers spf <spf-holdtime>
Example:
X330WAN-2DS1-1(super)# timers spf 5
traceroute
Use the traceroute command as a trace route utility.
The syntax for this command is:
traceroute <host>
Example:
X330WAN-2DS1-1(super)# traceroute 192.168.50.13
spf-holdtime The time in seconds of the delay between runs of
OSPF’s SPF calculation. The range of acceptable
values is 1 to 3600.
host IP address