Filter
Top Products
Chapter 7 X330WAN CLI Commands
112 Avaya X330W-2DS1 User’s Guide
Example:
X330WAN-2DS1-1(configure)# ip distribution access-list-copy 1
3
ip distribution access-list-name
Use the ip distribution access-list-name command to set the distribution
list name.
Note: This command is only supported by the X330WAN module.
The syntax for this command is:
ip distribution access-list-name <distribution-list-number>
<name>
Note: If you wish to define a name which includes spaces, you must enclose the
entire name in quotation marks, e.g. "new york".
Example:
X330WAN-2DS1-1(configure)# ip distribution access-list-name 5
"evening"
ip distribution access-list-owner
Use the ip distribution access-list-owner command to set the policy list
owner.
Note: This command is only supported by the X330WAN module.
destination-list An integer (1..99)
distribution-list-number An integer (1..99)
name List name