Filter
Top Products
General: Device Commands
Avaya X330W-2DS1 User’s Guide 51
Note: If the N/A is displayed for the EW_Archive file, this means that the Device
Manager S/W is not loaded correctly. Download the Device Manager S/W again.
erase startup-config
The erase startup-config command erases the startup configuration
NVRAM.
The syntax for this command is:
erase startup-config
get time
Use the get time command to retrieve the time from the network.
The syntax for this command is:
get time
Output Example:
get time
Time is being acquired from server 0.0.0.0!
hostname
Use the hostname command to change the Command Line Interface (CLI)
prompt. The current device number always appears at the end of the prompt.
ver num S/W Version number – relevant only for the Device
Management S/W
file type There are several file types:
• Running Conf – the configuration currently in use and the
startup configuration
• SW Web Image – Device Manager S/W archive file
file location Type of internal memory into which the file is loaded
file description Description of the file