Filter
Top Products
Policy CLI Commands
Avaya X330W-2DS1 User’s Guide 117
show ip access-lists
Use the show ip access-lists command to see all the current policy lists.
The syntax for this command is:
show ip access-lists[<policy-list-number>]
Output Example:
X330WAN-2DS1-1(configure)# show ip access-lists
show ip access-lists details
Use the show ip access-lists details command to view complete data of
a policy list (including DSCP and composite operation tables).
Note: This command is only supported by the X330WAN module.
The syntax for this command is:
show ip access-lists details [<policy-list-number>]
policy-list-number The policy list number (integer from 100 to 199 where
0 is the default list).
ip access-list 100 10 deny-and-notify tcp
192.168.55.0 0.0.0.255 range 5000 6000
any range 7000 8000
ip access-list 100 30 deny udp
any
any
optional
ip access-list 100 35 deny ip
any
any
ip access-list 100 55 fwd7 tcp
host 192.168.3.4 eq 33333
host 10.6.7.8
default action for list 100 is permit
policy-list-number The policy list number (integer from 100 to 199).
Entering 0 displays the default list.