Filter
Top Products
Chapter 7 X330WAN CLI Commands
148 Avaya X330W-2DS1 User’s Guide
Examples:
X330WAN-2DS1-1(super)# show queueing
Interface Name Voip mode Queue 1 (High) Queue 2 Queue 3 Queue 4 (Low)
---------------- --------- -------------- ----------- ----------- -----------
Serial 1:1 OFF 64 64 64 64
shutdown (Controller context)
This command shuts down the E1/T1 link. This has the effect of administratively
bringing the line down. In effect, it sends a 'blue alarm' on the line. Use the no form
of this command to reconnect the E1/T1 link.
The syntax for this command is:
[no] shutdown
shutdown (Interface context)
Use the shutdown command to shutdown the selected interface. Use the no form of
this command to activate the selected interface.
Note: This command is executed from the Serial, Loopback, Fast Ethernet, and
Console interfaces.
The syntax for this command is:
[no] shutdown
Note: The no shutdown option is not available in the Console interface.
speed (Console context)
Use the speed command to set the PPP baud rate to be used by asynchronous PPP
ports.
Note:
1. This command is executed from the Console interface.
2. The peer baud-rate must be set to the same value.