Filter
Top Products
Chapter 7 X330WAN CLI Commands
86 Avaya X330W-2DS1 User’s Guide
The syntax for this command is:
[no] ip vrrp <vr-id> priority <pri-value>
Example:
To set the priority value for virtual router 1 to 10:
X330WAN-2DS1-1(configure)# ip vrrp 1 priority 10
(ip vrrp) timer
Use the ip vrrp timer command to set the virtual router advertisement timer
value (in seconds) for the virtual router ID. Use the no form of this command to
restore the default value.
The syntax for this command is:
[no] ip vrrp <vr-id> timer <value>
Example:
To set the virtual router advertisement timer value for virtual router 3 to 2:
X330WAN-2DS1-1(configure)# ip vrrp 3 timer 2
network (Router-OSPF context)
Use the network command to enable OSPF in this network. The no form of this
command disables the OSPF in this network. The default is disabled.
The syntax for this command is:
network <net addr> [<wildcard-mask> [area <area id>]]
vr-id Virtual Router ID (1-255)
pri-value The priority value (1-254)
vr-id Virtual Router ID (1-255)
value The advertisement transmit time (seconds). The
range is from 1 to 255.
net addr IP address
wildcard-mask Wildcard mask address
area id Area ID. This parameter exists for compatibility with
the P550.