Filter
Top Products
Chapter 7 X330WAN CLI Commands
146 Avaya X330W-2DS1 User’s Guide
0 packets output,
0 output errors
Serial 1:1 is down, line protocol is down
Internet address is 2.2.2.2 , mask is 255.255.255.0 (advertised IPCP)
MTU 1500 bytes, Bandwidth 256 Kbit,
Encapsulation PPP,
LCP REQsent
IPCP Starting
0 packets input, Received 0 broadcasts,
0 input errors,
3872 packets output,
0 output errors
Console asynchronous mode is terminal
Terminal baud rate is 9600
show ip distribution access-lists
Use the show ip distribution access-lists command to display the
content of all current distribution lists or of a specific list.
The syntax for this command is:
show ip distribution access-lists [<distribution-list-number>]
Example:
To display the content of distribution list number 1:
X330WAN-2DS1-1(configure)# show ip distribution access-lists 1
Example:
To display the content of all current distribution lists:
X330WAN-2DS1-1(configure)# show ip distribution access-lists
show line console
Use the show line console command to display the console interface.
The syntax for this command is:
show line console
distribution list number The distribution list number. An integer from 1 to 99.