Filter
Top Products
Chapter 7 X330WAN CLI Commands
50 Avaya X330W-2DS1 User’s Guide
Example:
X330WAN-2DS1-1(super)# copy tftp SW_image c:\p330\p330web101
EW_archive c:\p330\p330web201 192.168.49.10
dir
Use the dir command to show the file types that have been downloaded to the
device.
The syntax for this command is:
dir
Output Example:
X330WAN-2DS1-1(super)# dir
M# file ver num file type file location file description
-- ---- -------- ---------- ------------- ----------------
1 startup-config N/A Startup Conf Nv-Ram Startup Config
1 running-config N/A Running Conf Ram Running Config
1 X330WAN-A N/A SW Component Flash Bank A Software Image - Bank
A
1 X330WAN-B 3.9.5 SW RT Image Flash Bank B Software Image - Bank
B
1 P3WAN N/A SW Web Image Nv-Ram EmWeb application
Output Fields:
EmWeb_File Embedded Web Manager image file name (full path).
ew_archive-file Embedded Web Manager archive file.
ip_address The IP address of the TFTP server.
Field Description
M# The device number
file There are several files loaded into the device’s memory:
• module-config – file which contains the configuration
settings made to this device
• stack-config – file which contains the configuration settings
made at the stack level (for example IP address of the stack)
• EW_Archive – file which contains the Device Manager
(Embedded Web) software