Filter
Top Products
Policy CLI Commands
Avaya X330W-2DS1 User’s Guide 119
Example:
X330WAN-2DS1-1(configure)# show ip composite-op 101 11
validate-group
Use the validate-group command to verify that all the rules in a priority list
are valid.
Note: This command can only be executed from the Serial, Loopback, Fast Ethernet
and Fabric Fast Ethernet interfaces of the X330WAN.
The syntax for this command is:
validate-group <policy-list-number> <direction> [quiet]
Example:
X330WAN-2DS1-1(config-if:Serial1:1)# validate-group 101 in
composite-operation-
index
Index of the operation in the table.
policy-list-number An integer (100..149) where 0 is the default list.
direction in|out
quiet Error messages not displayed.