Filter
Top Products
Chapter 7 X330WAN CLI Commands
48 Avaya X330W-2DS1 User’s Guide
copy running-config tftp
Use the copy running-config tftp command to copy the device
configuration from the current RAM Running Configuration to the TFTP file.
The syntax for this command is:
copy running-config tftp <filename> <ip>
Examples:
X330WAN-2DS1-1(configure)# copy running-config tftp
c:\p332\router1.cfg 192.168.49.10
copy startup-config tftp
Use the copy startup-config tftp command to copy the device
configuration from the NVRAM Startup Configuration to the TFTP file.
The syntax for this command is:
copy startup-config tftp <filename> <ip>
Examples:
X330WAN-2DS1-1(configure)# copy startup-config tftp
c:\p332\router1.cfg 192.168.49.10
copy tftp startup-config
Use the copy tftp startup-config command to copy the device
configuration from the saved TFTP file to the Startup Configuration NVRAM.
The syntax for this command is:
copy tftp startup-config <filename> <ip>
filename The file name (full path)
ip The IP address of the host
filename The file name (full path)
ip The ip address of the host
filename The file name (full path)
ip The ip address of the host