Filter
Top Products
Chapter 7 X330WAN CLI Commands
46 Avaya X330W-2DS1 User’s Guide
The following figure illustrates this introduction.
Figure 7.1 X330WAN CLI Contexts
X330WAN CLI Prompts
The following table displays examples of X330WAN-2DS1 CLI prompts.
N is the number of the device in a stack of WAN devices, n is the number of the
WAN port ("1" or "2"), Z is the interface number, and x is the number of the channel
group.
Table 7.1 X330WAN-2DS1 CLI Prompts
Mode/Context Prompt
User X330WAN-2DS1-N>
Supervisor X330WAN-2DS1-N(super)#
Configure X330WAN-2DS1-N(configure)#
Controller X330WAN-2DS1-N(config-controller:n)#
Interface
Console
X330WAN-2DS1-N(config-if:CON)#
Interface Fast
Ethernet
X330WAN-2DS1-N(config-if:FastEthernet1)#
Interface Fabric
Fast Ethernet
X330WAN-2DS1-N(config-if:FabricFastEthernetn)#
Interface
Loopback
X330WAN-2DS1-N(config-if:LoopbackZ)#
Interface Serial X330WAN-2DS1-N(config-if:Serialn:x)#
Controller Context
- Interface Console Context or
- Interface Fast Ethernet Context or
- Interface Fabric Fast Ethernet Context or
- Interface Loopback Context or
- Interface Serial Context
Other Contexts
User Mode
Configure Context