Filter
Top Products
Chapter 7 X330WAN CLI Commands
110 Avaya X330W-2DS1 User’s Guide
ip distribution access-default-action
Use the ip distribution access-default-action command to set the
default action for a specific policy list.
Note: This command is only supported by the X330WAN module.
The syntax for this command is:
ip distribution access-default-action <list-number> <default-
action>
Example:
X330WAN-2DS1-1(configure)# ip distribution access-default-
action 1 default-action-deny
ip distribution access-list
Use the ip distribution access-list command to create a distribution
policy statement.
Note: This command is only supported by the X330WAN module.
The syntax for this command is:
ip distribution access-list <policy-list-number>
<access-list-index> <action>
{<dest-ip> [<dest-wildcard>]|any}
policy-list-number An integer (1..99)
default-action default-action-deny|default-action-permit
policy-list-number An integer (1..99)
access-list-index An integer
action permit|deny
dest-ip IP network address
dest-wildcard IP network wildcard address