Filter
Top Products
Chapter 7 X330WAN CLI Commands
96 Avaya X330W-2DS1 User’s Guide
show ip route
Use the show ip route command to display information about the IP routing
table.
The syntax for this command is:
show ip route [<ip-address>[<ip-mask>]
Examples:
show ip route best-match
Use the show ip route best-match command to display a routing table for a
destination address.
The syntax for this command is:
show ip route best-match <dst addr>
Output Example:
X330WAN-2DS1-1(super)# sh ip route best-match 199.93.0.0
Searching for: 199.93.0.0
Showing 1 rows
Network Mask Interface Next-Hop Cost TTL Source
--------------- --------------- ------------ --------------- ----- --- -----
199.93.0.0 255.255.0.0 e-135new 135.64.76.1 1 n/a STAT-HI
show ip route static
Use the show ip route static command to display the static routes.
ip-address The IP address of the routes
ip-mask The IP mask of the routes
show ip route Display all routes
show ip route 137.32.50.13 Display a single route
show ip route 137.44.50.13 255.255.255.0 Display range of routes
dst addr IP address