Filter
Top Products
Policy CLI Commands
Avaya X330W-2DS1 User’s Guide 109
The syntax for this command is:
ip composite-op notify <policy-list-number> <composite-
operation-index> <notify>
Example:
X330WAN-2DS1-1(configure)# ip composite-op notify 101 17 send-
trap
ip composite-op priority
Use the ip composite-op priority command to set the Layer 2 priority of a
policy operation.
Note: This command is only supported by the X330WAN module.
The syntax for this command is:
ip composite-op priority <list-number> <composite-op-index>
<priority>
Example:
X330WAN-2DS1-1(configure)# ip composite-op priority 101 17
fwd1
Example:
X330WAN-2DS1-1(configure)# ip composite-op name 101 17 gold-
account
policy-list-number An integer (100..149), where 0 is the default
list.
composite-operation-index Index of operation in the table.
notify send-trap | no-trap
policy-list-number An integer (100..149), where 0 is the default
list.
composite-operation-index Index of operation in the table.
priority fwd0-7|no-change