Barco HDX W20 Projector User Manual


 
9. Image
3. Use the or key to select Clamp Delay or Clamp Width and use the or key to change the value.
Or,
press ENTER to open the specic adjustment menu. Follow the adjustment method as described in "Navigation and adjust-
ments", page 72.
9.6 Image File Services
9.6.1 Files and le manipulations
Connecting a new source.
Source dependent adjustments like image settings, aspect ratio and timings are stored in a dedicated image le.
Before using a new source, a correct image le has to be installed. The projector’s memory contains a list of les corresponding to
the most used sources. When the new source corresponds with one of these les, the le can be loaded and saved for future use.
When there is a little difference, the le can also be loaded and then edited until the source specs are reached.
VESA standards and video standards are pre-programmed.
Possible le Manipulations
The following le manipulations are possible :
Load : load the settings of a selected le for the current selected source of the active window (main or PiP)
Rename : renaming a le.
Delete : deleting a le (only custom les)
Delete all : delete all custom les
Options : way of loading a le when a source is selected.
9.6.2 Manual Load le
How to load
1. Press Menu to activate the menus and select Image Im age File S ervices Manual Load.
Image 9-60
Main menu, Image
Image 9-61
Image, image le services
Image 9-62
Image le services
2. Press ENTER to select.
R5905032 HDX SERIES 02/03/2015
123