Barco HDX W20 Projector User Manual


 
11. Lamp
11. LAMP
Overview
Lamp menu overview
Lamp power mode
Lamp power
Auto dimming when on Pause
Auto dimming when No Signal
Auto dimming when Over-temperature
CLO mode (Constant light output mode)
CLO targets
LPS power
Lamp identication
Z-axis adjustment
11.1 Lamp menu overview
Overview table
Level 1 Level 2 Level 3
Lamp
Power Power mode
Hush Kit installed?
Power
Auto dimming when pause
Auto dimming when No Signal
Auto dimming when Overtemperature
CLO mode
CLO targets
LPS Power
Identication
Z-axis Light output
11.2 Lamp power mode
What can be done?
The lamp power mode can be switched between Normal, Economic and Long Life. When playing in Economic and Long Life
mode, the lamp life time will be higher than in normal mode.
The counter of the lamp life time counts equal
for normal or economic mode but the customer will see that the ageing of the lamp is
lower in economic and long life mode.
Normal : maximum allowed power is fed to the lamp. Maximum light output is reached in this way.
Economic : a reduced wattage is fed to the lamp. Reduced light output but a longer life time for the lamp.
Long Life : wattage fed to the lamp reduce to 75%. Reduced light output but a longer life time for the lamp.
The lamp power mode setting is linked with the C
LO mode setting. When CLO mode settings is set to On, the lamp power mode
setting is ignored and projector will play in CLO mode. Once the CLO mode setting is switched to Off, the installed lamp power
mode setting will be used.
How to switch
1. Press Menu to activate the menus and select Lamp Power Mode.
R5905032 HDX SERIES 02/03/2015
153