Barco HDX W20 Projector User Manual


 
13. Projector Control
Image 13-45
Network, wireless
Image 13-46
Network, wireless
2. Use the or key to select IP Addr ess and press ENTER to activate the input box.
Image 13-47
Wireless IP address input
3. Press ENTER to open the Wireless menu.
4. Use the or key to change the selected character.
Use the or key to select another character.
Note: Digits can be en tered with the digit k eys on the remote control or the loca l keypad. When a digit is entered in that way,
the next character will be selected automatically.
13.5.10 Wireless subnet mask set up
Can only be used with a wireless network module installed.
Subnet for Wired and Wi must be different !
How to set up
1. Press Menu to activate the menus and select Projector Control Network Wireless Setup.
234 R5905032 HDX SERIES 02/03/2015