Filter
Top Products
3. Installation Guidelines
3. INSTALLATION GUIDELINES
Overview
• Safety Warnings
• General Installation Guidelines
• Projector Position
•Airflow
• Projector Configuration
• Available Lens Types
• Lens Formulas
• Lens Installation
• Lens Shift Capability
• Scheimpflug Lens Adjustment
• Cleaning the lens
• Battery Installation
WARNING: Before installing the projector, read first the safety instructions supplied with the BarcoReality
SIM 5plus.
3.1 Safety Warnings
Mercury Vapor Warnings
Keep the following warnings in mind when using the projector. The lamp used in the projecto
r contains mercury. In case of a lamp
rupture, explosion there will be a mercury vapor emission. In order to minimize the potential risk of inhaling mercury vapors:
• Ensure the projector is installed only in ventilated rooms.
• Replace the lamp module before the end of its operational life.
• Promptly ventilate the room after a lamp rupture, explosion has occurred, evacuate the room (particularly in case of a pregnant
woman).
• Seek medical attention if unusual health conditions occur after a lamp rupture, ex
plosion, such as headache, fatigue, shortness
of breath, chest-tightening coughing or nausea.
3.2 General Installation Guidelines
Ambient Temperature Conditions
Careful consideration of things such as image size, ambient light level, projector placement and type of screen to use are critical to
the optimum use of the projection system.
Min. ambient temperature : 10°C or 50°F.
Max. ambient temperature : 40°C or 104°F.
The projector will not operate if ambient air temperature falls outside t
his range 10°C to 40°C (50°F to 104°F).
Storage temperature: -35°C to +65°C (-31°F to 149°F).
Humidity Conditions
Storage: 0 to 98 % RH Non-condensing.
Operation: 0 to 95 % RH Non-condensing.
CAUTION: Harmful Environmental Contamination Precaution
R5976870 BARCOREALITY SIM 5PLUS/SIM 5R 04/04/2007 11