Filter
Top Products
15. Adjustment Menu
15. ADJUSTMENT MENU
Overview
• Preset Input Balance
• Force Lamp Mode
15.1 Preset Input Balance
CAUTION: Changing these settings may seriously affect the performance of the projector.
What can be done?
The main Input Balance is set by the Preset Input Balance, this is adjusted in the factory. This factory preset is active on all source
files.
It is advised not to adjust the Preset Black or White Input Balance.
15.2 Force Lamp Mode
What can be done?
This setting will force the projector to run in one of the following modes:
Lamp1
Only Lamp 1 is used
Lamp2
Only Lamp 1 is used
Dual Both Lamps are used
How to set the Force Lamp Mode?
1. Press the MENU key to ac
tivate the Menu bar.
2. Push the cursor key ← or → to highlight Adjustment in the menubar.
3. Push the ↓ key to pull down the Adjustment menu.
4. Push the cursor key ↑ or ↓ to highlight ForceLampMode.
5. Push the → keytopulldowntheForce Lamp Mode menu.
6. Push the cursor key ↑ or ↓ to highlight the desired Force Lamp Mode e.g. Lamp 1. (image 15-1)
7. Press ENTER to activate t
he selected Force Lamp Mode.
Image 15-1
R5976870 BARCOREALITY SIM 5PLUS/SIM 5R 04/04/2007 215