Filter
Top Products
10. Lamps Menu
Image 10-7
10.5 Lamp Reset Runtime
When to reset the Runtime?
This will r
eset the Lamp Runtime to 0.
CAUTION:
Reset lamp run time is only allowed when a new lamp is installed.
WARNING: Reset Lamp Runtime is reserved for qualified service personnel, inappropriate use may result in
a Lamp explosion.
How to reset the Runtime?
1. Press the MENU key to activate the Menu bar.
2. Push the cursor key ← or → to highlight Lamps in the menubar.
3. Push the
↓ key to pull down the Lamps menu.
4. Push the cursor key ↑ or ↓ to highlight Reset Runtime.
5. Push the → key to pull down the Reset Runtime menu.
6. Push the cursor key ↑ or ↓ to select the desired lamp e.g. Lamp 1 and press ENTER to select. (image 10-8)
The R eset Runtime dialog box will be displayed. (image 10-9)
7. Use the cursor key ← or → , the numeric keys on the RCU, or the local keypad, to enter the serial number of the new lamp.
Note: O nly valid lamp serial number are accepted.
8. Press ACCEPT to activate the new lamp history.
9. Press BACK to return to the Lamp menu.
R5976870 BARCOREALITY SIM 5PLUS/SIM 5R 04/04/2007
173