Filter
Top Products
5. Getting Started
The following table gives an overview of the different functionalities of the keys that can be found on the Local Keypad:
19
Cursor keys To make menu selections, to perform bare scale adjustments or to zoom/focus when the direct
access is active
20 ENTER
To start up the adjustment mode or to confirm an adjustment or selection in the adjustment mode
21
BACK To leave the selected menu or item (go upwards to previous menu)
22
SOURCE
Not used
23 Lens control
Use these buttons to obtain the desired ZOOM, SHIFT and FOCUS
24
STANDBY Standby button, to start projector when the power switch is switched on and to switch off the
projector without switching off the power switch
Attention:SwitchingtoStandby.Whentheprojectorisrunningandyouwanttogoto
standby, press the standby key for 2 seconds.
25 IR Receiver IR Receiver
5.4 Diagnose Leds
Diagnose Leds
Diagnose Leds
L
E
D
1
L
E
D
2
L
E
D
3
Image 5-3
Diagnose Leds
Following diagnose leds can be found on top of the projector:
Led # / Led Color Green
R
ed
Led 1
Cool down sequence: flickers 60
s
econds after switching to standby
Rescue program (Software error)
R5976870 BARCOREALITY SIM 5PLUS/SIM 5R 04/04/2007 35