Filter
Top Products
4. Connections
R / PR G / Y B / PB Hs / Cs Vs Optional
Optional
DVI
COMPUTER RS 232 C
RS232/422 OUTRS232/422 IN
IN L/R Signal10/100Base-T
Communication
R.C.
OUT Phased L/R Signal
Sim 5 plus Inputs
Computer
(R9828122)
Magik Interface II
Input Output
Image 4-6
Computer Input
Always use an interface (e.g. Barco’s Magik II Interface R9828122) when a computer and local monitor have
to be connected to the projector as the sig
nal cable coming from the projector is limited to 60 cm due to
interferences.
4.4 Communication Connections
Overview
• RS232/RS422 Connections
• Ethernet Connections
4.4.1 RS232/RS422 Connections
What is possible with the RS232/RS422 Connections?
1. Remote control :
- easy adjustment of projector when connected to an IBM PC (or compatible) or Apple computer.
- allow storage of multiple project
or configurations and set ups.
- wide range of control possibilities.
- address range from 0 to 255.
2. Data communications: sending data to the projector or copying the data from the projector to a memory device (hard disc,
floppy, etc.).
How to connect the RS232/RS422 ports?
1. Connect the D9 connector from the R
S232/RS422 cable to the RS Input on the projector. (image 4-7)
2. When applicable connect the RS232/RS422 Output to the next projector in the daisy chain setup.
R5976870 BARCOREALITY SIM 5PLUS/SIM 5R 04/04/2007
29