Filter
Top Products
11. Image Files Menu
Following items can be adjusted in the main dialog box:
Horizontal Total Pixels
If the value for "Horizontal Total Pixels" is wrong, sampling mistakes (small vertical bars with
noisy and unsharp data in the projected image) will be seen in the image.
Project a pixel on/of pattern, select "Total" and adjust the pixel quantity. Adjust for zero bars.
If the number of bars increase, adjust in the other direction.
Active Pixels
The "Active Pixels": determine the width of the window on the screen. This value is normally
given in the source specifications. If not, adjust until full image is displayed (no missing pixels).
Horizontal Start Number of pixels between the beginning of the input signal and the start of the video information
in the signal.
Horizontal Period
Already filled in with the correct value when active file.
Vertical Total Lines
Already filled when an active file is selected to be edited.
Active Lines
Number of horizontal lines determining the height of the projected image. This value is normally
given in the specification of the source. If not, adjust until full image height is displayed (no
missing lines).
Vertical Start Number of lines between the start of the input signal and start of the image on the screen.
How to Edit a file?
1. Press the MENU key to activate the Me
nu bar.
2. Push the cursor key ← or → to highlight Image Files in the menubar.
3. Push the ↓ key to pull down the Image Files menu.
4. Push the cursor key ↑ or ↓ to highlight Edit and press ENTER to select. (image 11-4)
The Edit custom file selection box will be displayed. (image 11-5)
5. Push the cursor key ↑ or ↓ to highlight the desired file and press ENTER to select.
The Ed it custom file dialog box will b
e displayed. (image 11-6)
6. Use the cursor key ← or → , the numeric keys on the RCU, or the local keypad, to edit and change the values, confirm with
ENTER.
Note: Fields that are grayed out are not updated (Total Pixels).
Image 11-4
186 R5976870 BARCOREALITY SIM 5PLUS/SIM 5R 04/04/2007