Filter
Top Products
5. Getting Started
5.8 Pointing the RCU
Pointing directly to the IR Sensor on the Projector
When using the wireless remote control, make sure you are within the effective operating distance, in a straight line: 30m (100ft).
The remote control unitwill not function properly ifstrong light strikes thesensor windowor if there are obstacles between theremote
control unit and the projector IR sensor.
F1
F2
F3
F4
F5
ADJ
EXIT
ENTER
PAUSE
PHASE
TEXT
SHARPN
TINT
COLOR
BRIGHTN
CONTR
TREBLE BALANCE
BASS VOL
90
7
8
5
6
3
4
12
RCU
IR
S
ensor on
t
op o
f
th
e pro
j
ec
t
o
r
Image 5-8
Pointing to the IR Sensor on the Projector
Pointing to the Reflective Screen
1. Point the front of the RCU to the reflective screen surface. (image 5-9)
Screen
RCU
IR Sensor on top of the projector
Image 5-9
Point the front of the RCU to t
he reflective screen surface
5.9 Controlling the Projector
5.9.1 Common Address
What is Common Address 0?
Every projector has a Common Address default set to ’0’, when the RCU is set to address ’0’, every projector, without exception will
listen to the commands
given by this RCU.
38
R5976870 BARCOREALITY SIM 5PLUS/SIM 5R 04/04/2007