5. Getting Started
5. GETTING STARTED
5.1 Operating the Projector
How to Operate the Projector?
The projector can be controlled by using:
• the Remote Control Unit (RCU).
• the Local Keypad on top of the Projector.
• the RS232 commands.
5.2 RCU Terminology Overview
What keys can be found on the RCU?
F1
F2
F3
MENU BACK
ENTER
PAUSE
AUTO IMAGE
PCRGB
VIDEO
Fire WireDVI
IQ-PC
SDI
S-VIDEO
LOGO
PHASE
PIP
TINT
COLOR
BRIGHTN
CONTR
FOCUS
LENS
ZOOM
LENS
ZOOM
DIGI
SHIFT
LENS
VOL
9
0
7
8
5
6
34
1
2
1
2
3
4
5
6
7
8
9
10
19
18
17
16
15
14
13
11
12
Image 5-1
RCU Overview
The following table gives an overview of the different functionalities of the keys that can be found on the RCU:
1 Function keys Not used
2 MENU Menu key, to enter or exit the Toolbar menu
3 Address key
(Recessed key), to enter the address of the projector (between 0 and 9). Press the recessed
address key with a pencil, followed by pressing one digit button between 0 and 9
4
LOGO Switch between displaying the internal or external pattern in the Geometry Distortion and the
Shape (Blanking) dialogbox.
5
PAUSE To stop projection for a short time, press ’PAUSE’. The image disappears but full power is
retained for immediate restarting.
6
STANDBY Standby button, to start projector when the power switch is switched on and to switch off the
projector without switching off the power switch
Attention: Switching to Standby. W
hen the projector is running and you want to go to
standby, press the standby key for 2 seconds.
R5976870 BARCOREALITY SIM 5PLUS/SIM 5R 04/04/2007 33