Filter
Top Products
9. Tools Menu
Image 9-4
9.2.3 Formatter
Picture in Picture
This menu item is grayed out and will be implemented in the near future.
9.3 Ethernet Conne
ction
What can be do
ne?
This menu item is used to set the Ethernet Communication parameters.
This Ethernet connection can be used to upload/download projectorsoftware and/or to setup RS232 communication (TCP-packets)
with the projector.
Following parameters are available
IP Address
IP Address of the projector (This is a non-adjustable value programmed into the Ethernet
board).
MAC Address MAC Address of the projector (This is a non-adjustable value programmed into the Ethernet
board).
DHCP
DHCP setting:
• Yes: The projector will dynamically obtain its IP address from the DHCP server.
• No: The IP address needs to be entered manually.
IP Address
Dynamic IP Address of the projector.
FTP Port FTP Port is always set to 21, do not adjust this setting.
FTP User FTP user name used by the FTP client program
FTP Password FTP password by the FTP client program
Communication P
ort
Communication P
ort is set to 6363, do not adjust this setting
How to set up the Ethernet Connection?
1. Press the MENU key to activate the Menu bar.
2. Push the cursor key ← or → to highlight Tools in the menubar.
3. Push the ↓ key to pull down the Tools menu.
4. Push the cursor key ↑ or ↓ to highlight Ethernet C onne ction and press ENTER to select. (image 9-5)
The Ethernet Connection dialog box will be displayed. (image 9-6)
5. Push the cursor key ↑ or ↓ to highlight the desired parameter.
6. Use the cursor key ← or → , the numeric keys on the RCU, or the local keypad, to edit and change the values.
7. Press BACK to return to the Tools menu.
R5976870 BARCOREALITY SIM 5PLUS/SIM 5R 04/04/2007
163