Filter
Top Products
9. Tools Menu
9. TOOLS MENU
Overview
• Tools Menu Overview
• Diagnostics
• Ethernet Connection
• Picture in Picture
9.1 Tools Menu Overview
Tools Menu Overview
• Diagnostics
- I2C...
- Lamps and power supply...
- Formatter...
• Ethernet Connection...
• Picture in Picture
9.2 Diagnostics
Overview
•I²C
• Lamps and Power Supply
• Formatter
9.2.1 I²C
What can be done?
This info screen will give an overview of the status and the hex. value of the slave address of the I²C controlled IC’s.
• Green Radio Button = OK
• Red Radio Button = Error
Following IC’s are shown in the I²C info screen:
• Lamp driver
• Motor driver
• Formatter
• Dimmer Driver
• Light Sensor
• FPGA Backplane 1
• ADC 9887A Layer 1
• Video decoder
How to consult the I²C menu?
1. Press the MENU key to activate the Menu bar.
2. Push the cursor key ← or → to highlight Tools in the menubar.
3. Push the ↓ key to pull down the Tools menu.
4. Push the cursor key ↑ or ↓ to highlight Diagnostics .
5. Push the → key to pull down the Diagnostics menu.
6. Push the cursor key ↑ or ↓ to highlight I2C and press ENTER to select. (image 9-1)
The I2C Diagnostics screen will be displayed. (image 9-2)
7. Press BACK to return to the Tools menu.
R5976870 BARCOREALITY SIM 5PLUS/SIM 5R 04/04/2007
161