Barco RS97670/03 Projector User Manual


 
B. Scheimpflug Lens Adjustment
Image B-4
Lens must be tilted from bottom to top
Image B-5
Turn bolt A clockwise to tilt the lens from bottom to top.
B.3 Left-Right Scheimpflug Adjustment
How to start the Left–Right Scheimpflug Adjustment?
1. By using the same piece of white cardboard, find out whether the centre–left or centre–right area of the image is focused in front
of the screen.
2. Is the centre–left area of the image focused in front of the screen?
If yes, Proceed with the Centre–Left Scheimpflug Adjustment.
If no, Thecentre-right areaof theimage isfocused infront of the screen,proceed with the Centre–Right Scheimpflug Adjustment.
Centre-Left Scheimpflug Adjustment
1. Unscrew bolt B (max 1/8
th
of a turn) to tilt the lens from left to right (when standing behind the projector). (image B-6, image B-7)
2. Check if the left area of the image is still focused in front of the screen.
3. Repeat steps 1and 2until thecentre–left area ofthe imageis focused on thescreen (together with thecentre andthe centre–right
areas).
R5976870 BARCOREALITY SIM 5PLUS/SIM 5R 04/04/2007
225