Filter
Top Products
C. Calibrate Measured Values
2. Enter the Red X, Y and Z values, measured with the Color meter, and press ENTER to continue.
3. A full green pattern is displayed, note the Green X, Y and Z values of the Color meter and press ENTER to continue.
4. Enter the Green X, Y and Z values, measured with the Color meter, and press ENTER to continue.
5. A full blue pattern is displayed, note the Green X, Y and Z values of the Color meter and press ENTER to continue.
6. Enter the Blue X, Y and Z values, measured with the Color meter, and press ENTER to continue.
7. A full white pattern is displayed, note the Green X, Y and Z values of the Color meter and press ENTER to continue.
8. Enter the White X, Y and Z values, measured with the Color meter, and press ENTER to continue.
9. A full maximum white pattern is displayed, note the Green X, Y and Z values of the Color meter and press ENTER to continue.
10.Enter the Maximum White X, Y and Z values, measured with the Color meter, and press ENTER to continue.
The Measured values are implemented into the Dynacolor™ tabel.
Image C-4
R5976870 BARCOREALITY SIM 5PLUS/SIM 5R 04/04/2007 231