Filter
Top Products
13. Installation Menu
4. Push the cursor key ↑ or ↓ to highlight Automatic Startup .
5. Push the → key to pull down the Automatic Startup menu.
6. Push the cursor key ↑ or ↓ to highlight the desired Automatic Startup setting. (image 13-37)
Automatic Startup Setting Starting up the projector with the Power Switch
On
The projector will start to image projection.
Off
The projector will start up to standby mode
7. Press ENTER to activate the selected Automatic Startup Setting.
8. Press BACK to return to the Installation menu.
Image 13-37
13.10 Background
What can be done?
If there is no signal connected, the projector will display a black or blue screen, depending on the background setting.
How to set Background?
1. Press the MENU ke
y to activate the Menu bar.
2. Push the cursor key ← or → to highlight Installation in the menubar.
3. Push the ↓ key to pull down the Installation menu.
4. Push the cursor key ↑ or ↓ to highlight Background.
5. Push the → key to pull down the Backgro und menu.
6. Push the cursor key ↑ or ↓ to highlight the desired Background setting e.g. Blue. (image 13-38)
210
R5976870 BARCOREALITY SIM 5PLUS/SIM 5R 04/04/2007