Filter
Top Products
10. Lamps Menu
Image 10-12
Image 10-13
Image 10-14
The us
eoftheDimmer catalog box is explained in the paragraph Dimmer.
CAUTION: The automatic adjustment of the CLO works prior to the manual dimmer adjustment.
10.8.2 Constant Light Output (CLO)
What can be done?
Proj
ectors in a multichannel setup may have different Lamp Runtimes, this will result in a difference in light output between the
projectors.
Within this menu it is possible to track and maintain the brightness level of the projector, the projectors will deliver a Constant Light
Output=CLO.
Whe
n CLO is set to ’Enabled’ the projector will measure and adjust the light output every 15 minutes.
CLO
will overrule the dimmer setting, when CLO is on and the dimmer is adjusted, the light output will be set
back to the CLO setting during the next CLO measurement+adjustment (every 15 minutes).
Use Barco’s xRACU control unit to manage the ’linked’ CLO level of multiple projectors in a multi channel
setup.
How to use CLO?
1. Press the MENU key to activate the Menu bar.
2. Push the cursor key ← or → to highlight Lamps in the menubar.
3. Push the ↓ key to pull down the Lamps menu.
176
R5976870 BARCOREALITY SIM 5PLUS/SIM 5R 04/04/2007