Filter
Top Products
7. Image Menu
AGC is only for video signals.
How use AGC on video?
1. Push the cursor key ↑ or ↓ to highlight AGC on video and press ENTER to continue. (image 7-54)
2. Push the → key to pull down the AGC on video menu.
A bullet will show the current AGC on video status e.g. On.
3. Push the cursor key ↑ or ↓ to enable or disable AGC.
Image 7-54
AGC can be disturbing in case of Macrovision encoded signals, therefore AGC can be disabled (Off) at any
time.
7.7.4 Manual Gain Control
Manual Gain Control is only available when Automatic Gain Control (AGC) is disabled.
What can be done?
Beside AGC there isthe possibilityto manually setthe gainof theincoming video signal. When the AGC is enabled (On),the manual
setting does not affect the gain, AGC must therefore be disabled.
The manual gain control must be done on an external p
attern with white areas (Grey scale bar pattern).
How to set the Manual Gain Control?
1. Push the cursor key ↑ or ↓ to highlight Manual Gain Control and press ENTER to continue. (image 7-55)
The Manual Gain Control sliderbox will be displayed. (image 7-56)
2. Use the cursor keys ← or → or the numeric keys on the RCU to change the Manual Gain Control of the displayed image.
R5976870 BARCOREALITY SIM 5PLUS/SIM 5R 04/04/2007
67