Filter
Top Products
Conettix D6600/D6100 | Computer Interface Manual | Appendix F: Format ID (by Message Type) – D6600 Only
146 Bosch Security Systems, Inc. | 1/07 | 4998122703-01
Appendix F: Format ID (by Message Type) – D6600 Only
If D6600 Menu Item 2.5.17 equals 1, the following outputs apply.
D6500 Byte Description
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
Generic
Example
h 9 r r l s s s s a a a a C C C C C C C C t
Table 106: Generic Byte Description
# Title Description
1 Header Character (h) Optional, check with the computer automation software for compatibility
2 Message Type 9
3-4 Receiver Number Receiver gateway number from 01 to 99
5 Line/Group Number Line number in the receiver gateway that sent the message
6-9 Spaces Six spaces
10-13 Account Number Account number, four digits
14-21 Channels Channels 1 to 8
22 Trailer Character Typically, this is HEX 14
SIA Mode Description Generic Example
<LF><CRC><9><sequence#><receiver#><line#>[#aaaa|CCCCCCCC]<CR>
Table 107: Generic SIA Byte Description
Title Description
L
Standard line feed character
CRC
Cyclical redundancy check number
Message Type
9
sequence#
The message sequence number, the valid sequence number range is 0001 to
9999
receiver#
The receiver gateway that sent the message, valid digits are 01 to 99
line#
(Line/Group #)
The line number of the line in the receiver gateway that sent the message. Valid
digits are 00 to 99. The receiver uses Line 0 (zero) for internal messages.
account#
The communicator's account number, four digits.
CCCCCCCC
Channel 1 to 8
The heavier outlined row in Table 106 and Table 107 indicate the meaning of the shaded digit in the
D6500 Byte Description, SIA Mode Description Generic Examples, and Table 108 on page 147.
Table 108 show examples for each format that the receiver supports. If Menu Item 2.5.17 = 1, the following
message type follows a specific format ID. If Menu Item 2.5.17 = 0, the output to automation follows the standard
message type ID.