Filter
Top Products
3-10
FAX-L1000 Chapter 3: Technical Reference
Scanning range
Item A4 Letter Legal B4 (AE only)
Effective 8.19"±0.004" 8.43"±0.004" 8.43"±0.004" 10.00"±0.004"
scanning width (208 ±0.1 mm) (214 ±0.1 mm) (214 ±0.1 mm) (254 ±0.1 mm)
Effective 11.54"±0.16" 10.84"±0.16" 13.84"±0.16" 14.17"±0.16"
scanning length (293 ±4.0 mm) (275.4±4.0 mm) (351.6±4.0 mm) (360.0±4.0 mm)
(Fine, Superfine)
Effective 11.54"±0.22" 10.84"±0.22" 13.84"±0.22" 14.17"±0.22"
scanning length (293 ±5.5 mm) (275.4 ±5.5 mm) (351.6 ±5.5 mm) (360.0 ±5.5 mm)
(Standard)
Left margin 0.04" ±0.12" 0.04" ±0.12" 0.04" ±0.12" 0.06" ±0.12"
(1.0 ±3.0 mm) (1.0 ±3.0 mm) (1.0 ±3.0 mm) (1.5 ±3.0 mm)
Right margin 0.04" ±0.14" 0.04" ±0.14" 0.04" ±0.14" 0.06" ±0.14"
(1.0 ±3.5 mm) (1.0 ±3.5 mm) (1.0±3.5 mm) (1.5±3.5 mm)
Top margin 0.08" ±0.08" 0.08" ±0.08" 0.08" ±0.08" 0.08" ±0.08"
(2.0 ±2.0 mm) (2.0 ±2.0 mm) (2.0 ±2.0 mm) (2.0 ±2.0 mm)
Bottom margin 0.08" ±0.08" 0.08" ±0.08" 0.08" ±0.08" 0.08" ±0.08"
(Fine, Superfine) (2.0 ±2.0 mm) (2.0 ±2.0 mm) (2.0 ±2.0 mm) (2.0 ±2.0 mm)
Bottom margin 0.08" ±0.14" 0.08" ±0.14" 0.08" ±0.14" 0.08" ±0.14"
(Standard) (2.0 ±3.5 mm) (2.0 ±3.5 mm) (2.0 ±3.5 mm) (2.0 ±3.5 mm)
Units are inches with mm shown in parentheses.
Figure 3-2 Scanning Range
NOTE
Document scanning width “A4/LTR” is set in service data #1SSSW SW 06,
bit 4.
SCANNING RANGE
SCANNING
DROP OUT RANGE
➃➂
➄
➅
➀
➁
Document leading edge
Document trailing edge
Left
margin
Right
margin
Effective
scanning width
Top margin
Effective
scanning length
Bottom margin