Filter
Top Products
4-6
FAX-L1000 Chapter 4: Maintenance and Service
1.2 Tools
1.2.1 General tools
Tool Use
Phillips screwdriver Removing/inserting screws
Slot head screwdriver Removing/inserting screws
Precision phillips screwdriver Adjust volume
Precision slot head screwdriver Removing plastic tabs
Tweezers Removing/inserting coil springs
Pliers, needle nose Attaching retaining ring
Digital volt meter Check voltage
Lint-free paper Clean transfer charging roller, fixing film
Isopropyl alcohol Clean fixing film, fixing entrance guide, fixing
pressure roller, fixing eject roller, face-up deflector,
static charge eliminator, etc.
Ruler Measure leading edge margin of print image
1.2.2 Special tools
Tool Use Part No.
Grease (TELLUS OIL 68) Apply to specified parts CK-8003
Grease (MOLYKOTE EM-50L) Apply to specified parts HY9-0007
Grease (FLOIL GE676) Apply to specified parts CK-0544
Printer driver tester Check operation of the RY9-0124
printer and options.
Thickness gauge (1.6mm) Used for installing the RY9-0123
separation guide of the
optional envelope feeder.
Thickness gauge (0.7mm) Used with the printer driver RY9-0122
tester to adjust installation
position of the envelope
multiple feed sensor of the
envelope feeder.
IC-Removing Tool (24~64pin) Remove the main ROM HY9-0022
on the SCNT board