Canon L1000 All in One Printer User Manual


 
5-194
FAX-L1000 Chapter 5: Appendix
##1334 [RX] Document attributes abnormal
Cause: Attributes of the received page such as size, resolution, and encoding
method are abnormal.
Solutions: (1) Re-establish communication.
(2) Output a communications analysis list, and analyze it.
##1336 [TX/RX] CSA reception
Cause: CSA was received from the other machine during transmission
Solutions: (1) Check whether the receiving machine’s memory is full when
transmitting.
(2) Check whether the other machine’s communication process has
been stopped.
(3) Re-establish communication.
(4) Output a communications analysis list, and analyze it.
##1337 [RX] Non-transmission monitoring timer (T.62 T1 timer) timed out
Cause: Expired in a fixed interval without receiving the data frame from the
sending side without the document being transmitted.
Solutions: (1) Check whether the other party’s machine is working properly.
(2) Re-establish communication.
(3) Output a communications analysis list, and analyze it.
##1339 [RX] CDR reception
Cause: CDR received from the transmitting side with document procedures
Solutions: (1) Check whether the other party’s machine is working properly.
(2) Re-establish communication.
(3) Output a communications analysis list, and analyze it.
##1340 [RX] CDD reception
Cause: CDD received from the transmitting side with document procedures
Solutions: (1) Check whether the other party’s machine is working properly.
(2) Re-establish communication.
(3) Output a communications analysis list, and analyze it.
##1341 [TX] RDPBN reception
Cause: RDPBN received from the transmitting side with document
procedures
The page could not be received correctly by the receiving side.
Solutions: (1) Re-transmit from the page where the error occurred.
(2) Output a communications analysis list, and analyze it.