Filter
Top Products
Command Descriptions
Programming Reference
VERSAJET MP3200
When processing the automatic setting (m = 64) of the paper layout, the printer feeds the
current roll paper to measure the paper layout. During this time, the printer does not print.
After the measuring, it writes the setting of layout from the measuring to the non-volatile
memory. Please note the following points when you use this function.
The printer may be BUSY when storing data and will not receive any data. In this case,
be sure not to transmit data from the host.
Excessive use of this function may destroy the non-volatile memory. As a guideline, do
not use any combination of the following commands more than 10 times per day for
writing data to the non-volatile memory: FS q, and GS ( A.
96 Preliminary Rev. 02