Filter
Top Products
Command Descriptions
Programming Reference
VERSAJET MP3200
ESC $
[Name] Set absolute print position
[Format] ASCII ESC $ nL nH
Hex 1B 24 nL nH
Decimal 27 36 nL nH
[Range] 0ЉnL 255, 0ЉЉnH 255Љ
[Default] None
[Description] Sets the print starting position to (nL + nH x256) x (horizontal or vertical motion unit) from the
beginning of the line.
[Notes]
The printer ignores any setting that exceeds the printing area
When standard mode is selected, the horizontal motion unit is used.
When page mode is selected, the horizontal or vertical motion unit is used for the print
direction set by ESC T.
When the starting position is set to the upper left or lower right of the printing area
using ESC T, the horizontal motion unit is used.
When the starting position is set to the upper right or lower left of the printing area
using ESC T, the vertical motion unit is used.
Even if the vertical or horizontal motion unit is changed after changing the printing position,
the setting of the printing position will not be changed.
Even if underline mode is turned on, the underline will not be printed under the space
skipped by this command.
58 Preliminary Rev. 02