Filter
Top Products
Command Descriptions
Programming Reference
VERSAJET MP3200
[Notes]
With a serial interface printer, be sure to use this function when the host can receive data.
With a parallel interface printer, data(printer ID, printer information) sent with this
command is temporarily stored in the printer send buffer like other transmitted data. When
the host goes into reverse mode, the printer then sends the data sequentially from the
beginning of the send buffer. Send buffer capacity is 99 bytes. Data exceeding this
amount is lost; therefore, when using this command, promptly change into reverse mode
to start the data receive process.
91 Preliminary Rev. 02