Filter
Top Products
Command Descriptions
Programming Reference
VERSAJET MP3200
ESC *
[Name] Select bit-image mode
[Format] ASCII ESC * m nL nH d1dk
Hex 1B 2A m nL nH d1 dk
Decimal 27 92 m nL nH d1 dk
[Range] m = 0, 1, 32, 33
0 nL 255
0 nH 3
0 d 255
k = nL + nH x 256 [in case of m = 0, 1]
k = nL + nH x 256 x 3 [in case of m = 32, 33]
[Description] Selects a bit-image mode using m for the number of dots specified by (nL + nH x256) as
follows:
m Mode Number of bits
for vertical
data
dot density in
horizontal
Amount of data(k)
0 8-dot single-density 8 single-density
nL + nH x 256
1 8-dot double-density 8 double-density
nL + nH x 256
32 24-dot single-density 24 single-density
nL + nH x 256 x 3
33 24-dot double-density 24 double-density
nL + nH x 256 x 3
* k indicates the bit image data
[Notes]
Data (d) specifies a bit printed to 1 and not printed to 0.
If the bit image data exceeds the number of dots to be printed on a line, the excess data is
ignored.
74 Preliminary Rev. 02