Filter
Top Products
Command Descriptions
Programming Reference
VERSAJET MP3200
ESC ESC 07
[Name] Adjust label printing position
[Format] ASCII ESC ESC 07 nn1
Hex 1B 1B 07 nn1
Decimal 27 27 07 nn1
[Range] n = “+” or “-”
0 n1 160 (0.0 ~ 16.0 mm)
[Default] n1 = 00
[Notes]
[Description] Adjusts label printing position in a selected direction and by a specified amount from the
default position.
n specifies the adjustment direction as follows:
When the LSB of n is “+”, the label position is adjusted in the normal direction.
When the LSB of n is “-”, the label position is adjusted in the reverse direction.
n specifies the adjustment amount.
This command is only effective when label is selected.
When executing this command, the paper is fed to adjust the print starting position of the
current label.
Adjustment amounts when the print starting position is out of the label cannot be
specified.
182 Preliminary Rev. 02