Filter
Top Products
Command Descriptions
Programming Reference
VERSAJET MP3200
GS W
[Name] Set printable area width
[Format] ASCII GS W nL nH
Hex 1D 57 nL nH
Decimal 29 87 nL nH
[Range] 0Љ (nL + nH x 256) Љ 65535 (0ЉnLЉ255, 0ЉnHЉ255)
[Default] nL = 0, nH = 0
[Description] In standard mode, sets the printable area to (nL + nH x256) x (horizontal motion unit).
[Notes]
When standard mode is selected, this command is enabled only when processed at the
beginning of the line.
The left margin has no effect in page mode. If this command is processed in page mode,
the left margin is set and it is enabled when the printer returns to standard mode.
If the [left margin + printable area width] exceeds the printable area, the printable area
width is automatically set to [printable area – left margin].
If this command and GS L set the printing area width to less than the width of one
character, the printing area width is extended to accommodate one character for the line.
Horizontal motion unit is used.
If horizontal motion unit is changed after setting the printable area width, the printable
area width setting will not be changed.
Left margin setting is effective until ESC @ is executed, the printer is reset, or the power
is turned off.
66 Preliminary Rev. 02