Filter
Top Products
Command Descriptions
Programming Reference
VERSAJET MP3200
Data is written to the non-volatile memory by this command. Note the following when
using this command.
The printer is BUSY when writing the data to the non-volatile memory. In this case, be
sure not to transmit data from the host because the printer does not receive data.
Excessive use of this function may destroy the non-volatile memory. As a guideline, do
not use any combination of the following commands more than 10 times per day for
writing data to the nonvolatile memory: FS q, GS ( A (part of functions), GS ( C (part of
functions), GS ( E (part of functions), GS ( L / GS 8 L (part of functions), GS ( M (part
of functions), GS g 0, and FS g 1.
176 Preliminary Rev. 02